The vxdmpadm setattr command can be used to assign a meaningful name to an existing enclosure, for example:

# vxdmpadm setattr enclosure emc0 name=GRP1

This example changes the name of an enclosure from emc0 to GRP1.

The following command shows the changed name:

# vxdmpadm listenclosure all

ENCLR_NAME      ENCLR_TYPE     ENCLR_SNO     STATUS    ARRAY_TYPE LUN_COUNT FIRMWARE
====================================================================================
Disk            Disk           DISKS         CONNECTED Disk       6         -
GRP1            EMC            000292601383  CONNECTED A/A        1         5875
hitachi_usp-vm0 Hitachi_USP-VM 25847         CONNECTED A/A        1         6008
emc_clariion0   EMC_CLARiiON   CK20007040035 CONNECTED CLR-A/PF   2         0324