README VERSION : 1.1 README CREATION DATE : 2012-03-05 PATCH-ID : 147850-01 PATCH NAME : VRTSvcsag 6.0RP1 BASE PACKAGE NAME : Veritas Cluster Server Bundled Agents by Symantec BASE PACKAGE VERSION : VRTSvcsag 6.0 OBSOLETE PATCHES : NONE SUPERSEDED PATCHES : NONE REQUIRED PATCHES : NONE INCOMPATIBLE PATCHES : NONE SUPPORTED PADV : sol10_x86 (P-PLATFORM , A-ARCHITECTURE , D-DISTRIBUTION , V-VERSION) PATCH CATEGORY : HANG REBOOT REQUIRED : NO PATCH INSTALLATION INSTRUCTIONS: -------------------------------- Please refer the release notes for installation instructions. PATCH UNINSTALLATION INSTRUCTIONS: ---------------------------------- Please refer the release notes for un-installation instructions. SPECIAL INSTRUCTIONS: --------------------- None SUMMARY OF FIXED ISSUESS: ----------------------------------------- 2662766 The clean entry point for Mount agent fails to un-mount a file system of type nfs. 2680435 IPMultiNICB agent does not carry Options attribute in local zone because of RunInContainer set to 0. SUMMARY OF KNOWN ISSUES: ----------------------------------------- KNOWN ISSUES : -------------- FIXED INCIDENTS: ---------------- PATCH ID:147850-01 * INCIDENT NO:2662766 TRACKING ID:2639181 SYMPTOM: The clean entry point for Mount agent fails to un-mount a file system of type nfs. DESCRIPTION: The clean entry point of Mount agent executes the umount command to un-mount the file system of type nfs. When the NFS mount point hangs without any response, umount command fails to un-mount the nfs file system and thus causes clean entry point to timeout. In addition to this the clean entry point of Mount agent also executes the df command to see if the file system is mounted before un-mounting it. The df command also hangs for nfs mount points on NFS client when the NFS service on NFS server is down. RESOLUTION: Symantec has modified the Mount agent to use umount -f command to un-mount file system and not to use the df command when file system of type nfs is configured with Mount resource. * INCIDENT NO:2680435 TRACKING ID:2680428 SYMPTOM: When you configure an IPMultiNICB resource for a Solaris zone, the VCS IPMultiNICB agent fails to plumb the options specified in the 'Options' attribute onto a target interface. DESCRIPTION: The 'Options' attribute includes a list of values for operating system-related parameters. These values are not plumbed onto the target interface. RESOLUTION: Symantec has modified the IPMultiNICB agent to fix the issue. INCIDENTS FROM OLD PATCHES: --------------------------- NONE