README VERSION		     : 1.1
README CREATION DATE         : 2015-11-24
PATCH-ID                     : 7.0.1.0 
PATCH NAME                   : VRTSsfcpi
BASE PACKAGE NAME            : VRTSsfcpi
BASE PACKAGE VERSION         : 7.0.0.0
SUPERSEDED PATCHES           : NONE
REQUIRED PATCHES             : NONE
INCOMPATIBLE PATCHES         : NONE
SUPPORTED PADV               : sol11_x64
(P-PLATFORM , A-ARCHITECTURE , D-DISTRIBUTION , V-VERSION)
PATCH CATEGORY               :  
PATCH CRITICALITY            : RECOMMENDED
HAS KERNEL COMPONENT         : NO
ID                           : NONE
REBOOT REQUIRED              : NO
REQUIRE APPLICATION DOWNTIME : NO

PATCH INSTALLATION INSTRUCTIONS:
--------------------------------
Please refer the release notes for installation instructions.

PATCH UNINSTALLATION INSTRUCTIONS:
----------------------------------
Please refer the release notes for un-installation instructions.

SPECIAL INSTRUCTIONS:
---------------------
NONE

SUMMARY OF FIXED ISSUES:
-----------------------------------------
 PATCH ID:7.0.1.0
3781993 (3852238)  Asynchronous Monitoring Framework (AMF) process may fail to be stopped after upgrade. 
3806206 (3806690)  After upgrade from 6.X to 7.0, Notify sink and application resource go into OFFLINE| UNKNOWN state. 


SUMMARY OF KNOWN ISSUES:
-----------------------------------------
NONE 


KNOWN ISSUES : 
--------------
NONE


FIXED INCIDENTS: 
----------------


 PATCH ID:7.0.1.0

 * INCIDENT NO:3781993	 TRACKING ID:3852238

SYMPTOM: The installer fails to stop AMF process because the AMF module cannot be unloaded. 

DESCRIPTION: During package/patch upgrade, AMF SMF service is enabled but fails to be disabled. This causes CPI to be unable to stop AMF because AMF 
module is in use. 

RESOLUTION: During upgrade, the installer will use a workaround to disable AMF SMF service with command:
svcadm disable -s system/amf
By using this command, AMF SMF service keeps in disabled state during package upgrade.

 * INCIDENT NO:3806206	 TRACKING ID:3806690

SYMPTOM: After upgrade from 6.X to 7.0, Notify sink and application resource go into OFFLINE| UNKNOWN state if it is configured using the wizards. 

DESCRIPTION: The 7.0 paths of some binaries have changed.
"/opt/VRTSvcs/portal/admin/notify_sink" is changed to "/opt/VRTSvcs/portal/vcs_wizards/admin/notify_sink". 
"/opt/VRTSvcs/bin/Application/getServiceStatus" is changed to "/opt/VRTSvcs/bin/Application/getServiceStatus.wiz".
Due to this, if any resource uses any of these paths, they would report UNKNOWN state. 

RESOLUTION: The installer performs the following path changes during upgrade procedure in VCS configuration file: 
(1) Change the binary path from "/opt/VRTSvcs/portal/admin/notify_sink" to "/opt/VRTSvcs/portal/vcs_wizards/admin/notify_sink".
(2) Change the binary path from "/opt/VRTSvcs/bin/Application/getServiceStatus" to "/opt/VRTSvcs/bin/Application/getServiceStatus.wiz". 

INCIDENTS FROM OLD PATCHES:
---------------------------
NONE