Array Support Library (ASL)/Array Policy Module (APM) Details
VRTS3par [Download] - 14 K Sign in if you want to rate this ASL/APM.

 Basic information

Library name: libvx3par
Library version: N/A
Package name: VRTS3par
Package version: 1.0
Supported product versions:
  • 5.0MP1
Embedded in VxVM?: No
Supported platforms:
  • AIX (5.2, 5.3)
TechNote: 292908
Popularity: 365 viewed  7 downloaded
Download size: 14K
Checksum: 2658747991
Release date: N/A

 Supported Arrays and Modes

  • InServ E200, InServ F200, InServ F400, InServ S200, InServ S400, InServ S800, InServ Storage Server E-Class, F-Class, S-Class, T-Class, InServ T400, InServ T800
Supported mode: A/A

 Readme file  [Save As...]

This TechFile provides information about the Array Support Library (ASL) for 3PAR InServ Storage Servers on Veritas Volume Manager 5.0 and later. For general information about ASLs, see TechNote 249446 (link in the Related section of this TechFile) Package Name: VRTS3par Package Version: 1.0 Supported versions of Veritas Volume Manager: 5.0 and later Supported Arrays: 3PAR InServ S400, S800 (Active/Active) At the bottom of this TechFile, click on Download Now to download the ASL package After downloading VRTS3par_5.0_AIX_5.3_1.0_292908.tar.Z, uncompress the file: # zcat VRTS3par_5.0_AIX_5.3_1.0_292908.tar.Z | tar xvf - Before adding any ASL package, ensure Veritas Volume Manager is installed and enabled: # vxdctl mode mode: enabled ASL Installation: To install the package: # installp -acgX -d ./ VRTS3par After the package is installed, you must run the vxdctl enable command to claim the disk array as a 3PAR array: # vxdctl enable Note: In some cases, it has been reported that the installation of the ASL or APM does not take effect, and the vxdctl enable command does not claim the enclosure and devices. In such cases, you can execute the vxconfigd -k command in addition to vxdctl enable. After executing vxdctl enable and vxconfigd -k, you should see libvx3par.so in the output of the vxddladm listsupport command: # vxddladm listsupport libname=libvx3par.so ATTR_NAME ATTR_VALUE ======================================================================= LIBNAME libvx3par.so VID 3PARdata PID VV ARRAY_TYPE A/A ARRAY_NAME 3PARDATA Package Information: # lslpp -l VRTS3par Fileset Level State Description ---------------------------------------------------------------------------- Path: /usr/lib/objrepos VRTS3par 1.0.0.0 COMMITTED VERITAS Array Support Library (1.0) Path: /etc/objrepos VRTS3par 1.0.0.0 COMMITTED VERITAS Array Support Library (1.0)

Read and accept Terms of Service