Create/Edit storage report options
Prev Using Data Insight reports Next

Create/Edit storage report options

Use this dialog to create an instance of a report. The options available on the page and their order depend on the type of report that you select.

Table: Create/Edit storage report options

Option

Description

Report Information

Enter information in the following fields:

  • Name - A logical name for the report.

  • Label - Add a label(s) to help you categorize and easily find the report from a long list of reports. For example, Finance or Media Files.

    See Organizing reports using labels.

  • Description -A short description of the data contained in the report.

  • Report type - The type of security report. This field is populated by default.

  • Select resources using - Select Paths or Custodian Information radio button.

    Depending on the selection, you can see the data selection or custodian selection option.

    Note:

    This field is available only in the following five reports :

    • Activity summary report for paths

    • Data aging report

    • Inactive folders report

    • Path permissions report

    • Consumption by folders report

  • Output format - Select the format in which you want to generate the report. You can select one or all of the given output formats.

  • Maximum reports to preserve - Select the number of report outputs you want the system to preserve. If both, global value and local value is not configured, then the value is considered as unlimited.

    In case of scheduled reports, setting up value of this parameter to Unlimited may fill up disk space. Configure the value appropriately by taking disk space into consideration.

    Note:

    You can configure a global setting to purge report outputs when they exceed a certain number. However, the value configured in the Maximum reports to preserve field takes precedence over the global setting.

    For information about data retention settings, see the Veritas Data Insight Administrator's Guide.

  • Schedule - Select the schedule at which you want the report to run.

  • Copy output to - Enter a path to copy report output files. To successfully copy a report output to an external computer, you must ensure that the Secondary Logon windows service is running in the Management Server.

    Note:

    When you specify a path in this field, select a folder that already exists. Data Insight does not create a new folder. Copying a report may fail if the folder is in use by any application, including Windows Explorer. To test a connection, check the number of connections allowed on the folder. If you have just created a folder and the folder is open in Windows explorer, the test connection will fail for default settings since the default number of connections allowed on a folder is one.

  • Select Credentials to access "Copy output to" path - Select a credential from the drop-down menu, so that Data Insight can direct the report output to the specified location. Additionally you can use the option for adding a new set of credentials if the required credentials are not already added. The credentials must have folder-level read, write, create, and delete permissions on the external computer where the report output is copied.

  • Overwrite option - Selecting this option overwrites the earlier report output files. If you clear this check box, Data Insight creates a new folder with a report run ID for every report run, and saves the report in the new folder.

Configuration

Select the conditions to configure the report:

  • Inactivity Period - From the drop-down, select the duration of inactivity for files.

    Only the files that have remained inactive for the selected duration are included in the report.

    This field is only available for the Inactive users report.

  • Bucket Size (Months) - Enter the bucket interval that you want to include in the report.

  • Include custom attributes of user - By default, the check box is cleared. Select the check box to select the custom attributes from the drop-down list.

    For more information on configuring the custom directory attributes, see the Veritas Data Insight Administrator's Guide.

  • Include data owner in report output - Select the order of the criteria for computing the owner of the data.

    This field is available only for select report types.

  • Activity Time Period - Enter the time range for which you want data to be included in the report.

    Select Duration to indicate the last n hours/days/weeks/months/year.

    Select Date Range to specify a specific time range.

  • Folder depth - This option is available only for the Consumption by Folders report.

    Select the subfolder levels to be included in the report. This option is useful when you want to limit the total output in the report.

    • Select Current Folder, to include the information about only the selected paths.

    • Select Next level sub directories radio button to include information about the first-level children of the selected paths.

  • Folder depth for selection of paths to report against - Select the depth of subfolders to be included in the report from the drop-down list. This option is useful when you want to limit the total output in the report. From the drop-down,

    • Select Current folder to include information about only the selected paths.

    • Select Specify Depth and enter the level at which you want to include the folders.

    This filed is available only for the following reports:

    • Activity Summary for Paths

    • Activity Summary for Users/Groups

  • Enter the Number of records you want to include in the report output.

    The report computes the number of records as the top N files based on the file size for every data owner, for every device path in the report input. From the top N files, (for example, in case of Inactive Folders report) the report will display the top N files that have remained inactive for the configured duration. The default is 25 records. In case of Consumption by folders report, this option appears only if you enable the check box Show details in reports.

  • Department mapping - You can map the department through the options available in the drop-down list . The generated report maps the department on the basis of the option you choose.

  • File type - Enter comma-separated file type in this field. You can enter the file type in this field for the file group that is not pre-configured for the type of file you want to include in the report output. This option is available for the following reports:

    • Consumption by File Group

    • Consumption by File Group and Owner

    • Inactive Data by File Group

  • File groups - Select a file group from the drop-down list. This option is available for the following reports:

    • Consumption by File Group

    • Consumption by File Group and Owner

    • Inactive Data by File Group

    Note:

    You can select either a file type or a file group in the report output.

  • Select columns to hide in output - Select the columns that you do not want to display in the report.

  • Truncate output if record exceeds- Enter the number of records (rows) after which the report output is truncated. By default, the value you specify in this field applies to all the report types for whichData Insight supports truncation.

    See Configuring a report to generate a truncated output.

Data Selection

Do one of the following:

  1. Select the Physical Hierarchy radio button to view the configured file servers or SharePoint web applications.

    Or, select the DFS Hierarchy radio button to view the configured DFS paths in a domain.

    Or, select the Containers radio button to view the available containers that can be added in the report.

    Click the site, file server, share, folder within a share, or a DFS path to select it. The selected data set is listed in the Selected resources pane.

  2. Add resource - Enter the resource path and click Add to include the path name in the report output.

  3. You can also use a CSV file to import paths for creating reports. Click Upload CSV. On the pop-up, you can download the CSV template to review the input values and the format of the CSV file for that particular report.

    Only valid paths in the .CSV file are displayed in the Selected Data pane.

    Browse to the location of the CSV file and click Upload.

This option is available for the following reports:

  • Activity Details for Paths

  • Activity Summary for Paths

  • Path Permissions

  • Entitlement Review

User Selection

From the list, click the user, group, or all users/groups radio button. The selected entities are listed in the Selected Users/Groups pane.

You can type a name in the search bar to search for a user or group. You can also type a domain name in the Domain Filter field to narrow your search to users in a specific domain.

Note:

You can search for a particular Built-in user or group by using the Domain Filter.

You can also filter a user or group from the Select Filter field.

Select the All Filtered Users check box in the Selected Users/Group pane to include all filtered users in the report.

You can also import user information using a .csv file for creating reports. Only valid paths in the .csv file are displayed in the Selected Users/Groups pane.

Exclusion List

Select the groups you want to exclude from the scope of the report.

Click the group to select it. The selected data set is listed in the Selected Groups pane.

Note:

You can search for a particular Built-in user or group by using the Domain Filter.

Notification

Enter email addresses of users you want to send the report to.

If the size of the attachment is above the configured limit, an email is sent without the attachment. You can configure the size of the attachment under Settings > SMTP Settings.

Remediation

Use this tab to instruct Data Insight to execute predefined actions on a report output.

Select Take action on data generated by report to enable automatic processing of data generated by a report.

Select any of the following:

  • Archiving (Enterprise Vault) - Select this option to archive data using Enterprise Vault. If you select this option you must specify a retention category and a post-processing action.

    You can add classification tags while archiving files into Enterprise Vault to enable faster search from Enterprise Vault. Select the Add Custom Index Property check box. You can select a Property type from the drop-down box like Text, Integer or Date. Depending on what you select, text boxes corresponding to Set, Name and Value appear. You must specify the name of the property set, the name of the property and the value of the property which will constitute the classification tag that will be pushed while archiving files into Enterprise Vault.

    See Pushing classification tags while archiving files into Enterprise Vault.

  • Custom Action 1 / Custom Action 2 - Select this option to specify a custom action defined by a custom script.

See About managing data using Enterprise Vault and custom scripts .
Prev Up Next
Consumption by File Group and Owner Home About Data Insight custom reports