< Previous  | TOC | Index | Next  >

Information to configure global clusters

• Name of the public NIC

  You may use the same NIC that you configured for the ClusterService group. Otherwise, you must specify appropriate values for the NIC when you are prompted.

  Example: en0

• Virtual IP address of the NIC

  You may use the same virtual IP address that you configured for the ClusterService group. Otherwise, you must specify appropriate values for the virtual IP address when you are prompted.

  Example: 10.10.12.1

• Netmask for the virtual IP address

  You may use the same netmask as configured for the ClusterService group. Otherwise, you must specify appropriate values for the netmask when you are prompted.

  Example: 255.255.240.0

• [HP-UX only] NetworkHosts IP address

  You may use the same NetworkHosts IP address as configured for the ClusterService group. Otherwise, you must specify appropriate values for the netmask when you are prompted.

  Example: 10.10.12.2