Note Perform this procedure if you configured rootability by encapsulating the root disk.
The root disk is under VxVM control if /dev/vx/dsk/rootvol
is listed as being mounted as the root (/
) file system. If so, unmirror and unencapsulate the root disk as described in the following steps:
vxplex
command to remove all the plexes of the volumes rootvol
, swapvol
, usr
, var
, opt
and home
that are on disks other than the root disk.
For example, the following command removes the plexes mirrootvol-01
, and mirswapvol-01
that are configured on a disk other than the root disk:
# vxplex -o rm dis mirrootvol-01 mirswapvol-01
Caution Do not remove the plexes that correspond to the original root disk partitions.
Following the removal of encapsulation, the system is rebooted from the unencapsulated root disk.