Table 4-2 shows possible VxVM/Solaris upgrade paths.
Note If you are upgrading from a release earlier than VxVM 3.5, you must upgrade to VxVM 4.0 before upgrading to VxVM 5.0.
Note
If the upgrade_start
script fails for any reason, run the upgrade_finish
script to undo any changes already made. Verify that the system is restored by comparing /etc/system
, /etc/vfstab
, and the output of the format
command. Then determine and correct the cause of the upgrade_start
failure. If you cannot correct the problem in a timely manner, restore the vfstab
file to the version saved in Preparing for the upgrade, restore any other applications, and perform an init 6
to completely restore the system
Note You cannot use the upgrade_start upgrade_finish scripts to upgrade from VxVM 3.5 MP4.