LMX Error Messages, Non-Critical

The following table contains LMX error messages that may be displayed during runtime. Refer to "Running Scripts for Engineering Support Analysis" on page 125 for information on how to gather information about your systems and configuration that Symantec support personnel can use to assist you.

If you encounter errors while running your Oracle application due to the display of these messages, you may use the lmxconfig command to turn off their display. For example, use this command to disable the display of messages:

Noncritical Error Messages

Message ID	LMX Message
06001	lmxreqlink duplicate kreq= 0xaddress, req= 0xaddress
06002	lmxreqlink duplicate ureq= 0xaddress kr1= 0xaddress, kr2= 0xaddress req type = number
06003	lmxrequnlink not found kreq= 0xaddress from= number
06004	lmxrequnlink_l not found kreq= 0xaddress from= number
06005	kreq was not found
06101	lmxpollreq not in doneq CONN kreq= 0xaddress
06201	lmxnewcontext lltinit fail err= number
06202	lmxnewcontext lltregister fail err= number
06301	lmxrecvport port not found unode= number node= number ctx= number
06302	lmxrecvport port not found (no port) ctx= number
06303	lmxrecvport port not found ugen= number gen= number ctx= number
06304	lmxrecvport dup request detected
06401	lmxinitport out of ports
06501	lmxsendport lltsend node= number err= number
06601	lmxinitbuf out of buffers
06602	lmxinitbuf fail ctx= number ret= number
06701	lmxsendbuf lltsend node= number err= number
06801	lmxconfig insufficient privilege, uid= number
06901	lmxlltnodestat: LLT getnodeinfo failed err= number

Message ID

LMX Message

06001

lmxreqlink duplicate kreq= 0xaddress, req= 0xaddress

06002

lmxreqlink duplicate ureq= 0xaddress kr1= 0xaddress, kr2= 0xaddress req type = number

06003

lmxrequnlink not found kreq= 0xaddress from= number

06004

lmxrequnlink_l not found kreq= 0xaddress from= number

06005

kreq was not found

06101

lmxpollreq not in doneq CONN kreq= 0xaddress

06201

lmxnewcontext lltinit fail err= number

06202

lmxnewcontext lltregister fail err= number

06301

lmxrecvport port not found unode= number node= number ctx= number

06302

lmxrecvport port not found (no port) ctx= number

06303

lmxrecvport port not found ugen= number gen= number ctx= number

06304

lmxrecvport dup request detected

06401

lmxinitport out of ports

06501

lmxsendport lltsend node= number err= number

06601

lmxinitbuf out of buffers

06602

lmxinitbuf fail ctx= number ret= number

06701

lmxsendbuf lltsend node= number err= number

06801

lmxconfig insufficient privilege, uid= number

06901

lmxlltnodestat: LLT getnodeinfo failed err= number