Enter a cluster name and ID to perform the basic cluster configuration.
installsfrac
-installonly
utility earlier, or if you ran the installsfrac
utility but declined to configure SF Oracle RAC at that point, start the installsfrac
-configure
script:
By default, the installsfrac program uses SSH for remote communication. However, to use RSH, specify the -rsh option with the installsfrac program.
# ./installsfrac -rsh -configure
hme0
is typically the network interface card for only the public network. In this example, qfe0
and qfe1
are the private heartbeat NICs on all nodes.
Note Oracle RAC requires the use of the same heartbeat interfaces on all hosts in the cluster.
Discovering NICs on galaxy ... discovered hme0 qfe0 qfe1
qfe2 qfe3 qfe4
Enter the NIC for the first private heartbeat NIC on
galaxy: [b,?] qfe0
Would you like to configure a second private heartbeat
Enter the NIC for the second private heartbeat link on
galaxy: [b,?] qfe1
Would you like to configure a third private heartbeat
link? [y,n,q,b,?] (n)
Are you using the same NICs for private heartbeat links
on all systems? [y,n,q,b,?] (y)
You may use NICs with different device names on some nodes. If necessary, indicate the NICs are different when prompted.
If you decline to set up these services, specify whether you want to set the user name and password for the Administrator, and whether you want to add another user to the cluster.