To configure LLT, GAB, VCSMM, and VxFEN drivers
/etc/llthosts
on the two existing systems. Using vi
or another text editor, add the line for the new node to the file. The file should resemble:
/etc/llthosts
file from one of the existing systems over to the new system. The /etc/llthosts
file must be identical on all systems in the cluster. For example, on saturn, enter:
/etc/llttab
file on the new system. For example:
link qfe0 /dev/qfe:0 - ether --
link qfe1 /dev/qfe:1 - ether --
Except for the first line that refers to the system, the file resembles the /etc/llttab
files on the other two systems. The cluster ID must be the same as that for the existing cluster.
vi
or another text editor to create the file /etc/gabtab
on the new system. It should resemble the following example:
Where N represents the number of systems in the cluster. For a three-system cluster, N would equal 3.
/etc/gabtab
file on each of the existing systems, changing the content to match the file on the new system.
/etc/vcsmmtab,/etc/vxfendg
, and /etc/vcsmm.conf
files on the new system by copying them from one of the other existing nodes:
#
scp galaxy:/etc/vcsmmtab /etc
===============================================================
Port a gen 4a1c0001 membership 01
Port b gen g8ty0002 membership 01