Configuring the Cluster Management Console
If you want to locally manage this cluster, then you must configure the Cluster Management Console. Note that this cluster can also be a part of the centrally managed clusters.
See Veritas Cluster Management Console.
To configure the Cluster Management Console
-
Review the required information to configure the Cluster Management Console.
-
Choose whether to configure the Cluster Management Console or not. Do one of the following:
-
Confirm whether you want to use the discovered public NIC on the first system. Do one of the following:
-
If the discovered NIC is the one to use, press
Enter
.
-
If you want to use a different NIC, type the name of a NIC to use and press
Enter
.
-
Confirm whether you want to use the same public NIC on all nodes. Do one of the following:
-
If all nodes use the same public NIC, enter
y
.
-
If unique NICs are used, enter
n
and enter a NIC for each node.
-
Enter the virtual IP address for the Cluster Management Console.
Enter the Virtual IP address for Cluster Management Console: [b,?] 10.10.12.1
-
Confirm the default netmask or enter another one:
Enter the netmask for IP 10.10.12.1: [b,?] (255.255.240.0)
-
Verify and confirm the Cluster Management Console information.