CFG {fencing_option}
|
Scalar |
Specifies the I/O fencing configuration mode.
1 - Coordination Point Server-based I/O fencing
2 - Coordinator disk-based I/O fencing
3 - Disabled mode
4 - Fencing migration when the cluster is online
(Required)
|
CFG {fencing_reusedisk}
|
Scalar |
If you migrate to disk-based fencing or to server-based fencing that uses coordinator disks, specifies whether to use free disks or disks that already belong to a disk group.
0 - Use free disks as coordinator disks
1 - Use disks that already belong to a disk group as coordinator disks (before configuring these as coordinator disks, installer removes the disks from the disk group that the disks belonged to.)
(Required if your fencing configuration uses coordinator disks)
|
CFG {fencing_ncp}
|
Scalar |
Specifies the number of new coordination points to be added.
(Required)
|
CFG {fencing_ndisks}
|
Scalar |
Specifies the number of disks in the coordination points to be added.
(Required if your fencing configuration uses coordinator disks)
|
CFG {fencing_disks}
|
List |
Specifies the disks in the coordination points to be added.
(Required if your fencing configuration uses coordinator disks)
|
CFG {fencing_dgname}
|
Scalar |
Specifies the disk group that the coordinator disks are in.
(Required if your fencing configuration uses coordinator disks)
|
CFG {fencing_scsi3_disk_policy}
|
Scalar |
Specifies the disk policy that the disks must use.
(Required if your fencing configuration uses coordinator disks)
|
CFG {fencing_cps}
|
List |
Specifies the CP servers in the coordination points to be added.
(Required for server-based fencing)
|
CFG {fencing_cps_vips}{$vip1}
|
List |
Specifies the virtual IP addresses or the fully qualified host names of the new CP server.
(Required for server-based fencing)
|
CFG {fencing_cps_ports}{$vip}
|
Scalar |
Specifies the port that the virtual IP of the new CP server must listen on. If you do not specify, the default value is 14250.
(Optional)
|
CFG {servers_to_remove}
|
List |
Specifies the CP servers in the coordination points to be removed. |
CFG {disks_to_remove}
|
List |
Specifies the disks in the coordination points to be removed |