autoreminor
|
(Veritas Volume Manager) Enable reminoring in case of conflicts during disk group import. |
autostartvolumes
|
(Veritas Volume Manager) Enable the automatic recovery of volumes. |
dmp_cache_open
|
(Symantec Dynamic Multi-Pathing) Whether the first open on a device performed by an array support library (ASL) is cached. |
dmp_daemon_count
|
(Symantec Dynamic Multi-Pathing) The number of kernel threads for DMP administrative tasks. |
dmp_delayq_interval
|
(Symantec Dynamic Multi-Pathing) The time interval for which DMP delays the error processing if the device is busy. |
dmp_fast_recovery
|
(Symantec Dynamic Multi-Pathing) Whether DMP should attempt to obtain SCSI error information directly from the HBA interface. This tunable must be set after Symantec Dynamic Multi-Pathing is started. |
dmp_health_time
|
(Symantec Dynamic Multi-Pathing) The time in seconds for which a path must stay healthy. |
dmp_log_level
|
(Symantec Dynamic Multi-Pathing) The level of detail to which DMP console messages are displayed. |
dmp_low_impact_probe
|
(Symantec Dynamic Multi-Pathing) Whether the low impact path probing feature is enabled. |
dmp_lun_retry_timeout
|
(Symantec Dynamic Multi-Pathing) The retry period for handling transient errors. |
dmp_monitor_fabric
|
(Symantec Dynamic Multi-Pathing) Whether the Event Source daemon (vxesd) uses the Storage Networking Industry Association (SNIA) HBA API. This tunable must be set after Symantec Dynamic Multi-Pathing is started. |
dmp_monitor_osevent
|
(Symantec Dynamic Multi-Pathing) Whether the Event Source daemon (vxesd) monitors operating system events. |
dmp_monitor_ownership
|
(Symantec Dynamic Multi-Pathing) Whether the dynamic change in LUN ownership is monitored. |
dmp_native_support
|
(Symantec Dynamic Multi-Pathing) Whether DMP does multi-pathing for native devices. |
dmp_path_age
|
(Symantec Dynamic Multi-Pathing) The time for which an intermittently failing path needs to be monitored before DMP marks it as healthy. |
dmp_pathswitch_blks_shift
|
(Symantec Dynamic Multi-Pathing) The default number of contiguous I/O blocks sent along a DMP path to an array before switching to the next available path. |
dmp_probe_idle_lun
|
(Symantec Dynamic Multi-Pathing) Whether the path restoration kernel thread probes idle LUNs. |
dmp_probe_threshold
|
(Symantec Dynamic Multi-Pathing) The number of paths will be probed by the restore daemon. |
dmp_restore_cycles
|
(Symantec Dynamic Multi-Pathing) The number of cycles between running the check_all policy when the restore policy is check_periodic. |
dmp_restore_interval
|
(Symantec Dynamic Multi-Pathing) The time interval in seconds the restore daemon analyzes the condition of paths. |
dmp_restore_policy
|
(Symantec Dynamic Multi-Pathing) The policy used by DMP path restoration thread. |
dmp_restore_state
|
(Symantec Dynamic Multi-Pathing) Whether kernel thread for DMP path restoration is started. |
dmp_retry_count
|
(Symantec Dynamic Multi-Pathing) The number of times a path reports a path busy error consecutively before DMP marks the path as failed. |
dmp_scsi_timeout
|
(Symantec Dynamic Multi-Pathing) The timeout value for any SCSI command sent via DMP. |
dmp_sfg_threshold
|
(Symantec Dynamic Multi-Pathing) The status of the subpaths failover group (SFG) feature. |
dmp_stat_interval
|
(Symantec Dynamic Multi-Pathing) The time interval between gathering DMP statistics. |
fssmartmovethreshold
|
(Veritas Volume Manager) The file system usage threshold for SmartMove (percent). This tunable must be set after Veritas Volume Manager is started. |
max_diskq
|
(Veritas File System) Specifies the maximum disk queue generated by a single file. The installer can only set the system default value of max_diskq. Refer to the tunefstab(4) manual page for setting this tunable for a specified block device. |
read_ahead
|
(Veritas File System) The 0 value disables read ahead functionality, the 1 value (default) retains traditional sequential read ahead behavior, and the 2 value enables enhanced read ahead for all reads. The installer can only set the system default value of read_ahead. Refer to the tunefstab(4) manual page for setting this tunable for a specified block device. |
read_nstream
|
(Veritas File System) The number of parallel read requests of size read_pref_io that can be outstanding at one time. The installer can only set the system default value of read_nstream. Refer to the tunefstab(4) manual page for setting this tunable for a specified block device. |
read_pref_io
|
(Veritas File System) The preferred read request size. The installer can only set the system default value of read_pref_io. Refer to the tunefstab(4) manual page for setting this tunable for a specified block device. |
reclaim_on_delete_start_time
|
(Veritas Volume Manager) Time of day to start reclamation for deleted volumes. This tunable must be set after Veritas Volume Manager is started. |
reclaim_on_delete_wait_period
|
(Veritas Volume Manager) Days to wait before starting reclamation for deleted volumes. This tunable must be set after Veritas Volume Manager is started. |
same_key_for_alldgs
|
(Veritas Volume Manager) Use the same fencing key for all disk groups. This tunable must be set after Veritas Volume Manager is started. |
sharedminorstart
|
(Veritas Volume Manager) Start of range to use for minor numbers for shared disk groups. This tunable must be set after Veritas Volume Manager is started. |
storage_connectivity
|
(Veritas Volume Manager) The CVM storage connectivity type. This tunable must be set after Veritas Volume Manager is started. |
usefssmartmove
|
(Veritas Volume Manager) Configure SmartMove feature (all, thinonly, none). This tunable must be set after Veritas Volume Manager is started. |
vol_checkpt_default
|
(Veritas File System) Size of VxVM storage checkpoints (kBytes). This tunable requires a system reboot to take effect. |
vol_cmpres_enabled
|
(Veritas Volume Manager) Allow enabling compression for Volume Replicator. |
vol_cmpres_threads
|
(Veritas Volume Manager) Maximum number of compression threads for Volume Replicator. |
vol_default_iodelay
|
(Veritas Volume Manager) Time to pause between I/O requests from VxVM utilities (10ms units). This tunable requires a system reboot to take effect. |
vol_fmr_logsz
|
(Veritas Volume Manager) Maximum size of bitmap Fast Mirror Resync uses to track changed blocks (KBytes). This tunable requires a system reboot to take effect. |
vol_max_adminio_poolsz
|
(Veritas Volume Manager) Maximum amount of memory used by VxVM admin I/O's (bytes). This tunable requires a system reboot to take effect. |
vol_max_nmpool_sz
|
(Veritas Volume Manager) Maximum name pool size (bytes). |
vol_max_rdback_sz
|
(Veritas Volume Manager) Storage Record readback pool maximum (bytes). |
vol_max_wrspool_sz
|
(Veritas Volume Manager) Maximum memory used in clustered version of Volume Replicator . |
vol_maxio
|
(Veritas Volume Manager) Maximum size of logical VxVM I/O operations (kBytes). This tunable requires a system reboot to take effect. |
vol_maxioctl
|
(Veritas Volume Manager) Maximum size of data passed into the VxVM ioctl calls (bytes). This tunable requires a system reboot to take effect. |
vol_maxparallelio
|
(Veritas Volume Manager) Number of I/O operations vxconfigd can request at one time. This tunable requires a system reboot to take effect. |
vol_maxspecialio
|
(Veritas Volume Manager) Maximum size of a VxVM I/O operation issued by an ioctl call (kBytes). This tunable requires a system reboot to take effect. |
vol_min_lowmem_sz
|
(Veritas Volume Manager) Low water mark for memory (bytes). |
vol_nm_hb_timeout
|
(Veritas Volume Manager) Volume Replicator timeout value (ticks). |
vol_rvio_maxpool_sz
|
(Veritas Volume Manager) Maximum memory requested by Volume Replicator (bytes). |
vol_stats_enable
|
(Veritas Volume Manager) Enable VxVM I/O stat collection. |
vol_subdisk_num
|
(Veritas Volume Manager) Maximum number of subdisks attached to a single VxVM plex. This tunable requires a system reboot to take effect. |
voldrl_max_drtregs
|
(Veritas Volume Manager) Maximum number of dirty VxVM regions. This tunable requires a system reboot to take effect. |
voldrl_max_seq_dirty
|
(Veritas Volume Manager) Maximum number of dirty regions in sequential mode. This tunable requires a system reboot to take effect. |
voldrl_min_regionsz
|
(Veritas Volume Manager) Minimum size of a VxVM Dirty Region Logging (DRL) region (kBytes). This tunable requires a system reboot to take effect. |
voldrl_volumemax_drtregs
|
(Veritas Volume Manager) Max per volume dirty regions in log-plex DRL. |
voldrl_volumemax_drtregs_20
|
(Veritas Volume Manager) Max per volume dirty regions in DCO version 20. |
voldrl_dirty_regions
|
(Veritas Volume Manager) Number of regions cached for DCO version 30. |
voliomem_chunk_size
|
(Veritas Volume Manager) Size of VxVM memory allocation requests (bytes). This tunable requires a system reboot to take effect. |
voliomem_maxpool_sz
|
(Veritas Volume Manager) Maximum amount of memory used by VxVM (bytes). This tunable requires a system reboot to take effect. |
voliot_errbuf_dflt
|
(Veritas Volume Manager) Size of a VxVM error trace buffer (bytes). This tunable requires a system reboot to take effect. |
voliot_iobuf_default
|
(Veritas Volume Manager) Default size of a VxVM I/O trace buffer (bytes). This tunable requires a system reboot to take effect. |
voliot_iobuf_limit
|
(Veritas Volume Manager) Maximum total size of all VxVM I/O trace buffers (bytes). This tunable requires a system reboot to take effect. |
voliot_iobuf_max
|
(Veritas Volume Manager) Maximum size of a VxVM I/O trace buffer (bytes). This tunable requires a system reboot to take effect. |
voliot_max_open
|
(Veritas Volume Manager) Maximum number of VxVM trace channels available for vxtrace commands. This tunable requires a system reboot to take effect. |
volpagemod_max_memsz
|
(Veritas Volume Manager) Maximum paging module memory used by Instant Snapshots (Kbytes). |
volraid_rsrtransmax
|
(Veritas Volume Manager) Maximum number of VxVM RAID-5 transient reconstruct operations in parallel. This tunable requires a system reboot to take effect. |
vx_bc_bufhwm
|
(Veritas File System) VxFS metadata buffer cache high water mark. This tunable requires a system reboot to take effect. |
vxfs_ninode
|
(Veritas File System) Number of entries in the VxFS inode table. This tunable requires a system reboot to take effect. |
write_nstream
|
(Veritas File System) The number of parallel write requests of size write_pref_io that can be outstanding at one time. The installer can only set the system default value of write_nstream. Refer to the tunefstab(4) manual page for setting this tunable for a specified block device. |
write_pref_io
|
(Veritas File System) The preferred write request size. The installer can only set the system default value of write_pref_io. Refer to the tunefstab(4) manual page for setting this tunable for a specified block device. |