< Previous  | TOC | Index | Next  >

Configuring the Cluster Management Console

If you want to locally manage this cluster, then you must configure the Cluster Management Console. Note that this cluster can also be a part of the centrally managed clusters.

See Veritas Cluster Management Console.

 To configure the Cluster Management Console

1. Review the required information to configure the Cluster Management Console.
2. Choose whether to configure the Cluster Management Console or not. Do one of the following:
   • To configure the Cluster Management Console on the systems, press Enter.

     Do you want to configure the Cluster Management Console

     [y,n,q](y)

   • To skip configuring the Cluster Management Console and advance to configuring SMTP, enter n.

     See Configuring SMTP email notification.

3. Confirm whether you want to use the discovered public NIC on the first system. Do one of the following:
   • If the discovered NIC is the one to use, press Enter.
   • If you want to use a different NIC, type the name of a NIC to use and press Enter.
4. Confirm whether you want to use the same public NIC on all nodes. Do one of the following:
   • If all nodes use the same public NIC, enter y.
   • If unique NICs are used, enter n and enter a NIC for each node.
5. Enter the virtual IP address for the Cluster Management Console.

   Enter the Virtual IP address for Cluster Management Console: [b,?] 10.10.12.1

6. Confirm the default netmask or enter another one:

   Enter the netmask for IP 10.10.12.1: [b,?] (255.255.240.0)

7. Verify and confirm the Cluster Management Console information.